Ferrari Bike Rack

 

Innovative Vacuum Mount Ferrari Bike Rack. £329.95

  • Shown on Ferrari 458 but will fit most models
  • Holds one bicycle, up to 45 lbs / 20kgs
  • Designed for roof boot or hatchback attachment
  • Bike Rack has a heavy-duty fork mount you can choose between 9mm / 15mm / 20mm sizes depending on the bike you intend to carry.
  • Three 15cm vacuum cups hold fork in place another holds the rear wheel these have a 210 lb / 95kg pull strength each
  • Vacuum cups can attach to metal, glass or fibreglass surfaces
  • Fork holder frame manufactured from 12mm thick high density polyethylene (HDPE) body for strength and durability
  • Made in the USA
  • Small can easily be transported in a carry on case
  • Please watch the installation video below
  • This bike rack was reviewed by UK Car Magazine EVO in Sept 2016 read their review of this vacuum cup Ferrari Bike Rack 

Vacuum Cups 

 

Vacuum cups employ the force of atmospheric pressure to grip a surface. When a vacuum exists between the cup and the car surface to which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, the vacuum cups used on this Ferrari bike rack have a hand actuated pump that removes air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, of your cars roof or boot distortion is reduced, allowing the cup to be used with very little risk of damage.

The vacuum cup's pump have a plunger with a red line, which serves as a vacuum indicator. Introduced in the 1960's, initially for use in holding film cameras to cars this safety device is still acknowledges as one of the most reliable warning systems available. This technology is tried and tested for over fifty years.

A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the car. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

 

vaccum cup camera mounts

Vacuum cups were developed in the film industry in the 1960's to hold camera's to cars. the technology is tried & tested for 50 years.

 

 

ferrari-bike-rack

Ferrari Bike Rack on 458

Ferrari Bike Rack

Rack supplied in two pieces one for forks one for rear tyre.

Ferrari Bike Rack Secured to car

Bike Rack Secured to car

Ferrari Bike Rack

Vacuum Cup Bike Rack on 458